Ar-15/308 Ar Prs Gen 3 Precision Stock Adjustable Rifle Length Magpul

Shop for Best Price Ar-15/308 Ar Prs Gen 3 Precision Stock Adjustable Rifle Length Magpul .Compare Price and Options of Ar-15/308 Ar Prs Gen 3 Precision Stock Adjustable Rifle Length Magpul from variety stores in usa. products sale.

"Today, if you do not want to disappoint, Check price before the Price Up.Ar-15/308 Ar Prs Gen 3 Precision Stock Adjustable Rifle Length Magpul You will not regret if check price." Ar-15/308 Ar Prs Gen 3 Precision Stock Adjustable Rifle Length Magpul under $50

Content:
The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height ... The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height ...

Ar-15/308 Ar Prs Gen 3 Precision Stock Adjustable Rifle Length Magpul.

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Adjustable for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock is intended for semi automatic sniper or varmint type rifles. It installs on rifle-length receiver extensions as well as mil-spec and A5 length carbine receiver extensions and includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling cups as well as M-LOK slots on the bottom for rear monopod mounting.

  • Mounts to rifle-length receiver extension tube without A2 spacer, but will accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included)
  • Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
  • Rubber butt-pad provides positive should purchase to prevent slippage and is adjustable for both cant and height
  • Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
  • Steel adjustment shafts finished with melonite for wear and corrosion resistance
  • All aluminum components finished with MIL-A-862F, Type III, Class 2 hard coat anodizing
  • Bottom M-LOK slots provide additional sling mounting possibilities for attaching 1913 picatinny railes for use with a monopod
  • Sling Mounts: Front & Rear rotoation-limited QD sling swivel mounts. Rear mount 1.25" aluminum sling loop (left side reversible)

NOTE: Due to the wide variety of designs and dimensions of carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed. Mounting to rifle-length receiver extension is recommended to ensure optimal fit and funtion.


Big Book Catalog, Issue:71, Page:050

Learn More

The Franklin Armory BFSIII AR-15 Trigger is an easy-to-install trigger unit that functions in almost any standard AR-15 lower receiver and provides ... The Franklin Armory BFSIII AR-15 Trigger is an easy-to-install trigger unit that functions in almost any standard AR-15 lower receiver and provides ...

Ar-15 Bfsiii Trigger Franklin Armory.

Allows for Faster Fire from Your AR-15

The Franklin Armory BFSIII AR-15 Trigger is an easy-to-install trigger unit that functions in almost any standard AR-15 lower receiver and provides shooters with a faster rate of fire in a semi-auto, ATF-approved platform.

The Franklin Armory BFSIII AR-15 Trigger is a three-position system, making use of all three selector positions on a standard AR-15 lower. The first and second positions are safe and semi-auto fire, respectively. However, the third position allows for a round to fire once on the pull of the trigger and once on the release of the trigger.

  • Trigger-pull weight measures about 4.5 pounds
  • Features a positive reset
  • Includes an enhanced buffer spring for added reliability
  • Fits .154-inch trigger-pin holes

The Franklin Armory BFSIII AR-15 Trigger includes a safety features that cancels the trigger-release shot by simply moving the selector switch to "safe" with the trigger pulled. Buyers should immediately seek out proper training after installation. The system cannot be purchased by residents of CA, DC, ND, NJ, NY or WA.

 

Please contact Franklin Armory directly with any warranty related issues.

Learn More

The Geissele AR-15 Lower Parts Kit contains all 17 parts necessary to get your lower receiver operational - minus the trigger and ... The Geissele AR-15 Lower Parts Kit contains all 17 parts necessary to get your lower receiver operational - minus the trigger and ...

Ar-15 Lower Parts Kit Geissele Automatics Llc.

Necessary Internal Components To Repair / Build / Rebuild a Custom Rifle

The Geissele AR-15 Lower Parts Kit contains all 17 parts necessary to get your lower receiver operational - minus the trigger and pistol grip. Geissele is renowned for superbly designed, meticulously manufactured products, and these parts meet their high standards. Items in the AR-15 Lower Parts Kit are manufactured to "mil-spec" (M16 / M4) dimensions to ensure optimum fit and function in your AR rifle or carbine.

The Geissele AR-15 Lower Parts Kit includes:

  • Bolt catch
  • Bolt catch plunger / spring / roll pin
  • Mag release
  • Mag release button
  • Mag release spring
  • Buffer retainer spring
  • Safety
  • Buffer retainer
  • Safety detent & spring
  • Triggerguard & roll pin
  • Takedown detents & springs
  • Pivot / takedown pins

The fire control system - trigger, hammer, disconnector (and pins) - may be the most "personal" part of any custom AR-15. Along with the pistol grip, it’s the area most customizers and custom builders prefer to select very carefully. As a result Geissele omits both components from this AR-15 Lower Parts Kit so you don’t have to spend money on parts you won’t use!


Big Book Catalog, Issue:71, Page:043

Learn More

Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those ... Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those ...

Ar-15 Stock Assy Collapsible Mil-Spec Brownells.

Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buffer. Buttstock is made from extremely tough, fiberglass-reinforced, injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square notches and pre-cut detents for staking to lock plate. Available with Mil-Spec (nominal 1.14" O.D.) receiver extension tube. Stock interior diameter is matched to buffer tube O.D. for a snug fit that eliminates un wanted play and rattles.


AR-15, Issue:11, Page:042
Big Book Catalog, Issue:71, Page:046

SPECS: Aluminum and fiberglass-reinforced, injection-molded nylon, matte black. 8¾" (22.2cm) OAL collapsed; 11¾" (29.9cm) OAL fully extended

Learn More

Vortex’s Strike Eagle 1-8x24 with Brownells mount is the quickest way to get a versatile, easy-to-use, fast-on-target scope on your AR-15. With ... Vortex’s Strike Eagle 1-8x24 with Brownells mount is the quickest way to get a versatile, easy-to-use, fast-on-target scope on your AR-15. With ...

Strike Eagle 1-8x24mm Scope Ar-Bdc2 Reticle Vortex Optics.

One-Package Precision Sighting Solution for Your AR-15

Vortex’s Strike Eagle 1-8x24 with Brownells mount is the quickest way to get a versatile, easy-to-use, fast-on-target scope on your AR-15. With a non-magnified true 1x view on the low end up to a full 8x zoom, the Vortex Strike Eagle 1-8x24 sets you up to address a variety of sighting scenarios, from engaging targets at point-blank out to extended ranges.

The included Brownells (080-001-351) mount means you have everything you need to install your Strike Eagle 1-8x24 on your AR-15 flattop rifle. Other features of the potent combo:

  • AR-BDC2 reticle subtends with popular .556 cartridges
  • Fast-focus eyepiece
  • Red illuminated, glass-etched reticle has a center target dot with a surrounding "halo" to aid in fast, instinctive sighting
  • Single-piece aluminum tube ensures proper alignment of the lenses and adjustment mechanism for optimal performance
  • Fogproof (nitrogen gas purged), shockproof, O-ring sealed to be waterproof & keep out dust
  • Capped reset turret
  • Impressive 100 MOA windage/elevation adjustment in 1/2 MOA increments - "fast" doesn’t mean sacrificing precision
  • Ideal for home defense, tactical competition, feral hog removal, and just about any other fast-targeting scenario

The Vortex Strike Eagle 1-8x24 scope with Brownells mount is the get-it-done sighting system that makes your Modern Sporting Rifle complete.

Learn More

The Geissele URGI AR-15 upper receiver is a near clone of the "Upper Receiver Group Improved" currently going into service with USASOC ... The Geissele URGI AR-15 upper receiver is a near clone of the "Upper Receiver Group Improved" currently going into service with USASOC ...

Ar-15 Usasoc Upper Receiver Group Improved (urgi) 5.56 M-Lok Geissele Automatics Llc.

Build Your Rifle on the Upper Receiver Used By USASOC - A Clone (Almost!)

The Geissele URGI AR-15 upper receiver is a near clone of the "Upper Receiver Group Improved" currently going into service with USASOC (United States Army Special Operations Command). It offers a host of improvements over the standard "mil-spec" M4 upper we’ve grown so accustomed to - and it will transform your AR-15 shooting experience. Brownells offers the Geissele URGI upper in "Stripped" form and a Complete model ready to snap onto the lower of your choice and hit the range. Let’s look at the Complete URGI first.

To begin, Geissele installs a 14.5" Daniel Defense barrel optimized to handle the full rigors of the new M855A1 (AB57) ammunition, with a Surefire SF4P four-prong flash hider pinned up front. Functioning as a highly effective flash suppressor, the URGI’s SF4P four-prong flash hider also serves as a rock-solid adapter for a Surefire SOCOM 5.56 Fast-Attach sound suppressor (not included). In between, a mid-length gas system with low-profile gas block ensures more reliable cycling than a standard carbine-length tube.

Each URGI is fitted with the handguard Geissele designed specifically for USASOC, the MK 16 M-LOK™ Super Modular Rail handguard with a full-length Picatinny top rail and lotsa slots for other accessories. T-markings are engraved on the rail but not painted white to help keep the rifle unobtrusive. The URGI Upper Receiver is also outfitted with Geissele’s ambidextrous Airborne Charging Handle, with easy-to-grasp levers that are deeply checkered to ensure a confident grip when you need to charge the chamber in a hurry.

Complete URGI upper receiver feature summary:

  • Core receiver with forward assist, shell deflector & ejection port cover
  • Daniel Defense 14.5" barrel with 1-7" rifling & 1/2"-28 tpi muzzle threads
  • Mid-length gas system with low-profile, stainless steel, Nitrided gas block (pinned)
  • Geissele MK 16 Super Modular Handguard
  • Pinned-and-welded Surefire SF4P four-prong flash hider
  • Geissele Airborne Charging Handle
  • Mil-spec M4 carbine bolt/carrier group

NFA DISCLAIMER/WARNING: The Complete URGI upper receiver contains a permanently pinned and welded muzzle device. This makes the muzzle device an integral part of the barrel to make the barrel meet the 16" minimum length requirement, and requires no registration or tax stamp from the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE). Removal or modification to the muzzle device, will result in converting this item to a regulated item by the National Firearms Act (NFA). Additional state and local restrictions may apply. It is the sole responsibility of the buyer to comply with any and all applicable laws.


Big Book Catalog, Issue:71, Page:005

Learn More

PMAG 20 GEN M3 brings all the GEN M3 enhancements of the 30-round model to the compact 20-round form factor. Departing from ... PMAG 20 GEN M3 brings all the GEN M3 enhancements of the 30-round model to the compact 20-round form factor. Departing from ...

Ar-15 20rd Pmag Gen M3 Magazine 223/5.56 Magpul.

Super-Durable & Ultra-Dependable PMAG Refined & Battle-Hardened By Combat Experience

PMAG 20 GEN M3 brings all the GEN M3 enhancements of the 30-round model to the compact 20-round form factor. Departing from the previous PMAG 20 standard, the GEN M3 features a curved body with the same constant-curve geometry of the 30 round model. This not only helps ensure more reliable feeding, but it gives you a shorter mag that’s easier to handle in the prone position.


AR-15, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:067
Sinclair, Issue:5B, Page:247

SPECS: Impact/crush-resistant molded hard polymer. Compatible with AR-15/M4/M16, HK® 416, MR556A1, M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and other similar lowers. 5.56mm/.223 ammunition only.

Learn More