Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc

If you find product , Deals.If at the time will discount more Savings So you already decide you want have Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc for your, but you don't know where to get the best price for this Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc . We already done the research and spend a lot of time for you. Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc to find out where to get the best deal on Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc.

Content:
Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from ... Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from ...

Ar-15/m16 Gen3-M Folding Stock Adapter Law Tactical Llc.

Put A Folding Stock On Any AR-Pattern Rifle!

Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating.

View additional product information

Will only work with compatible centerfire and mil-spec carriers.

Does Not work with any AR 9mm BCG.


AR-15, Issue:11, Page:048
Big Book Catalog, Issue:71, Page:052

SPECS: Machined 4140 steel, DLC finish, matte black. Adds 1.3" (3.4cm) to length of pull. 8.5 oz. (241g) wt. Do not fire rifle with stock folded.

Learn More

The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular ... The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular ...

Pf940cv1 80% Frame Aggressive Texture For Glock® 19/23/32 Black Polymer80.

The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.  

The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling - the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.

  • Compatible with Gen3 Glock® Components. Not Compatible with Gen4
  • Improved next generation ergonomics make for a great shooting pistol
  • High strength reinforced polymer construction provides a great basis for a reliable & durable gun
  • Aggressive texture on the PF940Cv1 ensures positive retention
  • Picatinny rail is compatible with all standard lights, lasers & accessories
  • Stainless steel locking block ensures positive operation & a lifetime of use
  • Stainless steel drop-in rear rail module interfaces with the slide and holds up to hard abuse
  • Hardened front and rear rail system pins ensure slide/rail/frame interface is rock solid
  • Includes complete finishing jig
  • Jig includes drill bits and end mill, allowing for complete construction

The 80% frame features are carried over from the original Polymer80 frames, making your build incredibly straightforward to complete. New grip profiling and improved overall design, make this not only an easier frame to operate and shoot, but looks great mounted to your favorite slide.

The PF940Cv1 is compatible with Glock® 19/23/32 frame components.

Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.


Big Book Catalog, Issue:71, Page:216

Learn More

The BRN-10™ by Brownells is a recreation of Eugene Stoner’s original lightweight .308 caliber battle rifle that revolutionized rifle design forever. For ... The BRN-10™ by Brownells is a recreation of Eugene Stoner’s original lightweight .308 caliber battle rifle that revolutionized rifle design forever. For ...

Brn-10™ Retro Rifle 308/7.62 20in Barrel Brownells.

A Piece of History, Fresh from the Factory & Ready To Shoot

The BRN-10™ by Brownells is a recreation of Eugene Stoner’s original lightweight .308 caliber battle rifle that revolutionized rifle design forever. For the first time, it is possible for the shooter of average means to own - and shoot - a meticulously detailed, factory-new, semi-auto replica at a fraction of a scarce original’s price. The BRN-10™ accurately replicates the original .308 AR in great detail - and it’s built to modern standards using the latest manufacturing technology.

21st Century Technology Meets Historical Detail. Designed in partnership with FM Products, our BRN-10™ receivers are fully machined, not forged, from 7075 T6 aluminum billet. The distinctive lines of late Armalite® AR-10® rifles are carefully reproduced, including the slab-sided lower with straight magazine well. Takedown pins, selector lever, magazine release, and bolt release all have crisp horizontal serrations that match the original rifles.

Clean, Uncluttered, Still "Futuristic". The absence of a forward assist and shell deflector makes the BRN-10™ upper unusually uncluttered. Up top is the original "trigger"-style charging handle prominently located under the carry handle and positioned for rapid, easy operation - a practical benefit somewhat lost with the later charging handle location.

The BRN-10’s rear sight is fully enclosed by the carry handle, like the original. A simple, A2-style horizontal thumbwheel lets you adjust elevation, while windage is changed by loosening a setscrew and drifting the rear peep. A small window in the rear of the carry handle lets you see the current elevation setting.

Detail Under the Hood. Inside the BRN-10™, the carrier has the distinctive flats and two stabilizing flanges at the rear found on early carriers, and the entire bolt/carrier group is chrome-plated. The bolt itself is machined from 9310 carbon steel and magnetic particle inspected (MPI) to make sure there are no microscopic flaws that could cause premature failure - a benefit the original guns did not have.

The BRN-10’s 20" barrel, chambered in .308 Winchester, is made for Brownells by Faxon. It first gets a QPQ Nitride finish for excellent resistance to surface wear. After nitriding, the barrel gets top coat that replicates the look of the classic manganese phosphate finish found on the 1950s rifles.

The handguard drops in like a standard AR-15 handguard, but its external contours replicate the original AR-10® ’guard. Buttstock and pistol grip are from the Brownells Retro line; the buttstock is a Type D stock, without a trap door.

Choose Your Model. The Brownells BRN-10™ rifle is available in two models. The BRN-10A leans heavily on the earliest rifles, with an open 3-prong Dutch-style flash hider, functional heavy fluting on the barrel under the handguard, and brown furniture that mimics the look of the original fiberglass. The BRN-10B is inspired by later export rifles and has a closed-prong, Portuguese-type flash hider, later-style black furniture, and a lightweight barrel that makes for a surprisingly quick-handling .308 rifle.

Up-to-Date & Compatible. Brownells BRN-10™ rifles accept standard metal DPMS/SR-25 magazines. They are NOT compatible with Magpul PMAGs due to lower receiver contour. A majority of the components on the BRN-10™ are compatible with modern DPMS/SR-25 parts or AR-15 parts. See Compatibility Notes below.

Brownells BRN-10™ Features & Details: 

  • Receivers machined from billet 7075 T6 aluminum
  • .308 Winchester chambered, 20" barrel with 1-10" twist
  • .750" diameter at the gas block
  • "Trigger"-style charging handle on top of receiver, under carry handle 
  • Chrome-plated bolt/carrier group with period details
  • Magnetic particle inspected 9310 carbon steel bolt
  • Brownells Retro buttstock assembly & pistol grip 
  • Flat slip ring assembly
  • Standard AR-15-style front sight base
  • Period-style rear sight • 5/8"-24 tpi muzzle threads
  • Rifle receiver extension (buffer tube) with correct rifle buffer & spring 
  • Accepts standard, metal DPMS/SR-25 magazines (Magpul PMAGs will NOT work)
  • Comes with one 20-round Brownells aluminum magazine, chamber safety flag, safety manual, and copy of the USGI Field Manual

BRN-10A Features & Details:

  • Heavy-contour barrel with aggressive fluting underneath the handguard 
  • Open, 3-prong, Dutch-style flash hider with black QPQ Nitride finish 
  • Brown Retro furniture to replicate original fiberglass look
  • Weight: 8lbs 9oz
  • Length: 40.5 inches

BRN-10B Features & Details:

  • Lightweight barrel
  • Closed-prong, Portuguese-style flash hider with black QPQ Nitride finish
  • Black Retro furniture to replicate later production AR-10® rifles
  • Weight: 7lbs 14oz
  • Length: 40.75 inches

Compatibility Notes: DPMS/SR-25 compatible parts on the Brownells BRN-10™ rifle include: magazine, bolt/carrier group, barrel assembly, barrel nut, slip ring assembly, crush washer, muzzle devices, buffer, buffer spring, handguard, magazine latch, and magazine release spring.

AR-15 compatible components include: front sight base assembly, gas tube, handguard cap, drop-in GI-style handguards, receiver extension (buffer tube), buffer retainer & spring, takedown detents & springs, selector, selector detent & spring, trigger assembly, buttstock assembly, and pistol grip & screw.

Learn More

Forged from 7075-T6 aluminum, the Aero Precision M5 308 Upper Receiver is a great platform for a big-bore AR build. Precision ... Forged from 7075-T6 aluminum, the Aero Precision M5 308 Upper Receiver is a great platform for a big-bore AR build. Precision ...

308 Ar M5 Upper Receiver Aero Precision.

Forged from 7075-T6 aluminum, the Aero Precision M5 308 Upper Receiver is a great platform for a big-bore AR build.  Precision machined to Aero Precision’s specifications, the upper features M4 feedramps and a matte black hard coat anodized Mil 8625 Type 3 Class 2 finish.  DPMS pattern takedown holes (.2795”) allows for compatibility with a wide range of lower receivers.  Receiver is compatible with standard DPMS pattern 308 components, including lowers, bolt carriers, charging handles and barrels.  Comes with forward assist and ejection port cover installed.  Works with DPMS high profile handguards.


AR-15, Issue:11, Page:001
Big Book Catalog, Issue:71, Page:002

SPECS: Fits - DPMS pattern 308 parts, including barrel, bolt carrier, charging handle and lower. Weight 14.1 oz.

Learn More

The Raptor™ ambidextrous charging handle by Radian Weapons (formerly AXTS) is truly revolutionary in design & function. From rapid palm “blading” or ... The Raptor™ ambidextrous charging handle by Radian Weapons (formerly AXTS) is truly revolutionary in design & function. From rapid palm “blading” or ...

Ar-15 Raptor Charging Handle 5.56 Radian Weapons.

The Raptor™ ambidextrous charging handle by Radian Weapons (formerly AXTS) is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and milspec anodized.


Big Book Catalog, Issue:71, Page:036

Learn More