Brn-10™ Retro Rifle 308/7.62 20in Barrel Brownells
"Today, if you do not want to disappoint, Check price before the Price Up.Brn-10™ Retro Rifle 308/7.62 20in Barrel Brownells You will not regret if check price." who sells Brn-10™ Retro Rifle 308/7.62 20in Barrel Brownells
Brn-10™ Retro Rifle 308/7.62 20in Barrel Brownells.
A Piece of History, Fresh from the Factory & Ready To Shoot
The BRN-10™ by Brownells is a recreation of Eugene Stoner’s original lightweight .308 caliber battle rifle that revolutionized rifle design forever. For the first time, it is possible for the shooter of average means to own - and shoot - a meticulously detailed, factory-new, semi-auto replica at a fraction of a scarce original’s price. The BRN-10™ accurately replicates the original .308 AR in great detail - and it’s built to modern standards using the latest manufacturing technology.
21st Century Technology Meets Historical Detail. Designed in partnership with FM Products, our BRN-10™ receivers are fully machined, not forged, from 7075 T6 aluminum billet. The distinctive lines of late Armalite® AR-10® rifles are carefully reproduced, including the slab-sided lower with straight magazine well. Takedown pins, selector lever, magazine release, and bolt release all have crisp horizontal serrations that match the original rifles.
Clean, Uncluttered, Still "Futuristic". The absence of a forward assist and shell deflector makes the BRN-10™ upper unusually uncluttered. Up top is the original "trigger"-style charging handle prominently located under the carry handle and positioned for rapid, easy operation - a practical benefit somewhat lost with the later charging handle location.
The BRN-10’s rear sight is fully enclosed by the carry handle, like the original. A simple, A2-style horizontal thumbwheel lets you adjust elevation, while windage is changed by loosening a setscrew and drifting the rear peep. A small window in the rear of the carry handle lets you see the current elevation setting.
Detail Under the Hood. Inside the BRN-10™, the carrier has the distinctive flats and two stabilizing flanges at the rear found on early carriers, and the entire bolt/carrier group is chrome-plated. The bolt itself is machined from 9310 carbon steel and magnetic particle inspected (MPI) to make sure there are no microscopic flaws that could cause premature failure - a benefit the original guns did not have.
The BRN-10’s 20" barrel, chambered in .308 Winchester, is made for Brownells by Faxon. It first gets a QPQ Nitride finish for excellent resistance to surface wear. After nitriding, the barrel gets top coat that replicates the look of the classic manganese phosphate finish found on the 1950s rifles.
The handguard drops in like a standard AR-15 handguard, but its external contours replicate the original AR-10® ’guard. Buttstock and pistol grip are from the Brownells Retro line; the buttstock is a Type D stock, without a trap door.
Choose Your Model. The Brownells BRN-10™ rifle is available in two models. The BRN-10A leans heavily on the earliest rifles, with an open 3-prong Dutch-style flash hider, functional heavy fluting on the barrel under the handguard, and brown furniture that mimics the look of the original fiberglass. The BRN-10B is inspired by later export rifles and has a closed-prong, Portuguese-type flash hider, later-style black furniture, and a lightweight barrel that makes for a surprisingly quick-handling .308 rifle.
Up-to-Date & Compatible. Brownells BRN-10™ rifles accept standard metal DPMS/SR-25 magazines. They are NOT compatible with Magpul PMAGs due to lower receiver contour. A majority of the components on the BRN-10™ are compatible with modern DPMS/SR-25 parts or AR-15 parts. See Compatibility Notes below.
Brownells BRN-10™ Features & Details:
- Receivers machined from billet 7075 T6 aluminum
- .308 Winchester chambered, 20" barrel with 1-10" twist
- .750" diameter at the gas block
- "Trigger"-style charging handle on top of receiver, under carry handle
- Chrome-plated bolt/carrier group with period details
- Magnetic particle inspected 9310 carbon steel bolt
- Brownells Retro buttstock assembly & pistol grip
- Flat slip ring assembly
- Standard AR-15-style front sight base
- Period-style rear sight • 5/8"-24 tpi muzzle threads
- Rifle receiver extension (buffer tube) with correct rifle buffer & spring
- Accepts standard, metal DPMS/SR-25 magazines (Magpul PMAGs will NOT work)
- Comes with one 20-round Brownells aluminum magazine, chamber safety flag, safety manual, and copy of the USGI Field Manual
BRN-10A Features & Details:
- Heavy-contour barrel with aggressive fluting underneath the handguard
- Open, 3-prong, Dutch-style flash hider with black QPQ Nitride finish
- Brown Retro furniture to replicate original fiberglass look
- Weight: 8lbs 9oz
- Length: 40.5 inches
BRN-10B Features & Details:
- Lightweight barrel
- Closed-prong, Portuguese-style flash hider with black QPQ Nitride finish
- Black Retro furniture to replicate later production AR-10® rifles
- Weight: 7lbs 14oz
- Length: 40.75 inches
Compatibility Notes: DPMS/SR-25 compatible parts on the Brownells BRN-10™ rifle include: magazine, bolt/carrier group, barrel assembly, barrel nut, slip ring assembly, crush washer, muzzle devices, buffer, buffer spring, handguard, magazine latch, and magazine release spring.
AR-15 compatible components include: front sight base assembly, gas tube, handguard cap, drop-in GI-style handguards, receiver extension (buffer tube), buffer retainer & spring, takedown detents & springs, selector, selector detent & spring, trigger assembly, buttstock assembly, and pistol grip & screw.
308 Ar M5 Upper Receiver Aero Precision.
Forged from 7075-T6 aluminum, the Aero Precision M5 308 Upper Receiver is a great platform for a big-bore AR build. Precision machined to Aero Precision’s specifications, the upper features M4 feedramps and a matte black hard coat anodized Mil 8625 Type 3 Class 2 finish. DPMS pattern takedown holes (.2795”) allows for compatibility with a wide range of lower receivers. Receiver is compatible with standard DPMS pattern 308 components, including lowers, bolt carriers, charging handles and barrels. Comes with forward assist and ejection port cover installed. Works with DPMS high profile handguards.
AR-15, Issue:11, Page:001
Big Book Catalog, Issue:71, Page:002
SPECS: Fits - DPMS pattern 308 parts, including barrel, bolt carrier, charging handle and lower. Weight 14.1 oz.Learn More
Ar-15 Raptor Charging Handle 5.56 Radian Weapons.
The Raptor™ ambidextrous charging handle by Radian Weapons (formerly AXTS) is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and milspec anodized.
Big Book Catalog, Issue:71, Page:036
Mk18 Stripped Socom Upper Receiver W/ Handguard Only Daniel Defense.
Daniel Defense manufactures the highest quality complete AR-15 upper receivers on the market today! Every Daniel Defense upper is painstakingly hand assembled, quality assurance tested, and test fired to ensure that the highest quality product makes it to the hands of customers.
The upper receiver is mil-spec with indexing marks and M4 feed ramps. CNC Machined of 7075-T6 aluminum, type III hard coat anodized, color is black. The barrel is chrome-moly vanadium steel, cold hammer forged in a 1:7 twist, 10.3" government profile, chrome lined. The handguard is the Daniel Defense RIS II MK18 model. It is CNC machined of 6061-T6 aluminum, and type III hard coat anodized, Flat Dark Earth. The gas system is made up of the pinned, low-profile gas block CNC machined from 4140 hardened steel with mil-spec heavy phosphate coating. It also features a carbine length direct impingement gas system.
These Upper Receiver Assemblies have been installed on a lower receiver & test fired. Please expect some signs of use from this testing conducted by Daniel Defense.
AR-15, Issue:11, Page:003
Big Book Catalog, Issue:71, Page:004
SPECS: Upper Receiver: CNC machined 7075-t6 Aluminum. Barrel: chrome moly vanadium steel, 1:7 twist, 10.3". Gas system: CNC machined 4140 hardened steel. Handguard: CNC machined 6061-T6 aluminum.
The handguard is Flat Dark Earth and the upper receiver is black.Learn More
Roll Pin Holders Brownells.
Hollow-Ended "Starter" Punches For Roll Pins
Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear M16/AR-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on Sig handguns. Finish driving with roll pin punch. O/A in chart means "Overall". Available individually or as a set of 5.
AR-15, Issue:11, Page:082
AR-15, Issue:11, Page:083
Big Book Catalog, Issue:71, Page:084
Big Book Catalog, Issue:71, Page:085
Big Book Catalog, Issue:71, Page:428
SPECS: Steel, knurled handle. Set of 5.Learn More
Ar-15 Upper Parts Kit Aero Precision.
The Aero Precision upper parts kit includes the parts you need to assemble your AR15 Upper Receiver.
- Forward Assist Assembly
- Forward Assist Spring
- Forward Assist Roll Pin
- Ejection Port Cover Door
- Ejection Port Cover Rod with c-clip
- Ejection Port Cover Spring
Big Book Catalog, Issue:71, Page:044